Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
18:01:33 - 11/14/2024

V8 Dakotas
FromMessage
davedoty
Dodge Dakota
JOIN HERE
 Email

4/24/2005
01:04:11

Subject: 97 5speed5.2 to 5.9 swap done
IP: Logged

Message:
It is done and went off almost without a hitch. I opened up the 360 and installed a hv oil pump, resealed the intake, and put on a new water pump before installing. Started right up only issue was a vacuum leak on #7 injector. Fixed that right away and all was good for a while. It (sometimes) has a slight hesitation at tip in and a "lean" pop. I did keep the 318 PCM as it is a 97 with a five speed and I don't know if I have any options in that department. Any ideas?
If anyone is wondering, I got the 360 out of a 98 RT (with harmonic balancer), flywheel from a 96 Ram, and used a Luk clutch set with a bushed pilot bearing that fits in the crank flange.



b1llyw
GenIII
 Email User Profile


4/24/2005
07:35:24

RE: 97 5speed5.2 to 5.9 swap done
IP: Logged

Message:
It all sounds good except for the pcm. We can get you a Cam Cal (flash) on your 318 pcm to run the 360 a lot better. Give us a call Monday. 321-635-8866.

Bill White - KRC Performance
'02 QC Sport Plus, 4x4, 4.7, 5spd, 3.55 LSD, Leather, Sirius, 180 t-stat, NGK 2262's, KYB Gas-A-Just Shocks, MBRP Stainless Split Duals, Superchips, HO Cams, MP Air Filter

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.