Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
18:03:41 - 11/14/2024

V8 Dakotas
FromMessage
CJ
Dodge Dakota
JOIN HERE
 Email

12/29/2003
13:49:28

Subject: Stalling....help!!!!
IP: Logged

Message:
I start my truck and it starts fine...then imediatly the rpm's drop and it stalls unless I keep on the gas...and whenenver I let off the gas while driving the rpm's try to drop but since I am moving the tranny won't let the rpm's drop low enough to stall...I've had this problem before and I cleaned out the TB and fuel injectors and it hasn't done it in a long time but recently it started up again....anyone have any ideas on what could be wrong? and if I do have to clean those items out again...what would cause them to get so dirty so quickly?



ord623
Dodge Dakota
JOIN HERE
 Email

12/29/2003
20:30:15

RE: Stalling....help!!!!
IP: Logged

Message:
try cleaning the idle air control motor. pull it out and inspect it for carbon build up. clean it and ther port as neccessary. if it's clean but still does this it's a good chance that the iac is bad.



01quadcab4x4
Dodge Dakota
JOIN HERE
 Email

12/30/2003
23:18:45

RE: Stalling....help!!!!
IP: Logged

Message:
Just had the same exact problem you described. I ended up cleaning the injectors which seemed to help a little. Then I cleaned out the TB with cleaner and a long q-tip. Seemed to stop the problem but something didn't seem right. Check my plugs and they were all shot. 76,000! Truck running great.



CJ
Dodge Dakota
JOIN HERE
 Email

12/30/2003
23:47:04

RE: Stalling....help!!!!
IP: Logged

Message:
yeah I'll have to take a look tomorrow...I sure hope it's not the plugs...I just changed them not too long ago...thanks guys!...keep the ideas coming



CJ
Dodge Dakota
JOIN HERE
 Email

12/31/2003
14:33:29

RE: Stalling....help!!!!
IP: Logged

Message:
well I fixed it...on the 5.2 there is a vaccum hose coming off the front of the TB and the little pice of rubber tubing that conected the hose to the TB was cracked...a trip to the store for a free piece of tubing and what do ya know...no more stalling...amazing that something as simple as that could cause a whole heap of problems!...thanks for all the input guys! now it's back to tearin' ricers a new one rather than two footed driving



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.