Forums
Forum Tools
|
 |
17:47:30 - 11/14/2024
V8 Dakotas
| From | Message |
Jeff
Dodge Dakota
JOIN HERE
11/18/2002
08:54:19
|
 Subject: M1 Turtles Ready to ship
IP: Logged
Message:
If any of you are still looking for a Turtle now is the time to let me know.
I don’t think I will make the small one’s this time unless there is enough of you that want one.
Most of the request have been for the large turtle. I will also make a extra large for those of you that didn’t think the large one was big enough, it will be 25% bigger then the large one.
I will make both sizes in 2 versions, so they will fit the 2bbl M1with the EGR set-up (with no modifications needed, bolts right in) and the 2 & 4bbl M1 without the EGR set-up (you will need to drill a 5/16 hole at the bottom of your intake, very easy and can be done with intake installed)
You need to let me know if you have the EGR plug at the bottom of your 2bbl M1 intake with your order, so I can ship you the correct one.
The LARGE TURTLE will be $50.00 Shipped
The EXTRA LARGE TURTLE will also be $50.00 Shipped
The New Extra Large Turtle will use a different size bolt and will not work with the old plug, Sorry about this but the 10-32 button head screws don’t come any longer then the ones I used, and now I have to use a ¼-28 bolt.
You can send payments to FlameRedRT@Hotmail.com with paypal to make sure you get one and I will ship right away. If the above email address is blanked out it is
FlameRedRT @ Hotmail.com (with no spaces)
If you want to send me a Money Order that is fine.
Send it to
Jeff Arnold
c/o J&H Machine Tools
4345 Morris Park Dr.
Charlotte, NC 28227
Thanks in advance and if you have any questions feel free to email me.(DON’T FORGET TO LET ME KNOW IF YOU HAVE THE EGR SET-UP )
Jeff
|
tom reeves
Dodge Dakota
JOIN HERE
5/31/2015
07:51:26
| RE: M1 Turtles Ready to ship
IP: Logged
Message:
i am absolutely interested in a turtle for my
upcoming build. planning to do a 365" hi
compression motor with a balanced botom end,
eddy alloy heads and an M-1 4 bbl intake and
spintech midlength headers with 2.5" pipe. My
goal is 20mpg highway on 93 octane.
I welcome your opinion on how the turtle would
play into this equation and any other ideas you
might have to help me reach my goal.
Thanks in advance for your expertise,
tom
|
tom reeves
Dodge Dakota
JOIN HERE
10/01/2015
08:36:03
| RE: M1 Turtles Ready to ship
IP: Logged
Message:
i am absolutely interested in a turtle for my
upcoming build. planning to do a 365" hi
compression motor with a balanced botom end,
eddy alloy heads and an M-1 4 bbl intake and
spintech midlength headers with 2.5" pipe. My
goal is 20mpg highway on 93 octane.
I welcome your opinion on how the turtle would
play into this equation and any other ideas you
might have to help me reach my goal.
Thanks in advance for your expertise,
tom
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
