Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
17:50:48 - 11/14/2024

V6 Dakotas
FromMessage
Rich
Dodge Dakota
JOIN HERE
 Email

5/27/2004
23:11:12

Subject: No spark!!! V6
IP: Logged

Message:
I got a 98 V6 i took out the motor to fix a broken stud. And when i went to put it back in, it would not start, no fuel and no spark but after a bit, the wire from the crankshaft position sensor were broken but still no spark. can someone help me.....thanks (all the connection and grounds are good)



J and J Auto
GenII
 Email User Profile


5/28/2004
11:13:27

RE: No spark!!! V6
IP: Logged

Message:
Check all the fuses in the power dist box under
hood be sure all relays are in tight.

If it was fine before it has to be a connection
or a wire off somewhere

If the wire on the crank sensor was arcing you may
have destroyed the sensor

Larry
J&J Auto

rich
Dodge Dakota
JOIN HERE
 Email

5/28/2004
16:32:32

RE: No spark!!! V6
IP: Logged

Message:
if that sensor controls the fuel pump and spark.it should be good because my fuel pump is working....true???



mikejak
Dodge Dakota
JOIN HERE
 Email

5/28/2004
22:56:44

RE: No spark!!! V6
IP: Logged

Message:
You have to try this!!!!!!!!!!! I just got in from doing this fix!!!!!!! Standing at the drivers SIDE and facing the box with all of the relays in it next to the battery there is a large bundle of wires running along the wheel well. It runs from the firewall to the relay box. Cut the friction tape (or unpeel) on this bundel from the area under the relay box where there is an intersecton of other bundles towards the firewall. So you don't have to reveal any intersections just that biggest bundle. In that bundle is a red wire that is connected to three other red wires. This connection is the culprit. See if it is corroded and bad it probably is. Clean it up and reconnect this should do it.



J and J Auto
GenII
 Email User Profile


5/29/2004
22:07:27

RE: No spark!!! V6
IP: Logged

Message:
mikejak

This condition is also listed in chryslers TSB's
tech service bullitons

Red wire about a foot back in harnass goes to 3
wirs power for comp, fuel and ign

They should be soldered after cutting out the
caroaded connectors

Larry
J&J Auto

rich
Dodge Dakota
JOIN HERE
 Email

6/01/2004
21:41:28

RE: No spark!!! V6
IP: Logged

Message:
It worked ........thanks guys



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.