Forums
  Forum Tools
|
|
17:44:52 - 11/14/2024
V6 Dakotas
From | Message |
hi-point Dodge Dakota JOIN HERE
11/07/2003 11:36:28
|
Subject: 1990 3.9 auto trans question IP: Logged
Message: My grandfather has a 1990 dakota with the 3.9 and a auto trans. Lately its been making a noise in the tranny like bearings are going bad. the faster you go the louder it gets. is this a common problem with these trucks?
whats a rebult tranny cost for these? None of our salvage yards have a tranny.
Also we have another problem with the truck since he has had it.
when cold ot runs really bad. It spits out black smoke, hunts between overdrive and drive, surges and idles bad. We have replaced MANY parts on this truck to no avil.
We have replaced, wires,plugs,cap & rotor button, ecm, all the lifters, fuel filter, fuel pressure reg. what else could it be?
oh, btw the truck has 179k on it.
thanks,mike
|
J and J Auto GenII
11/07/2003 11:57:39
| RE: 1990 3.9 auto trans question IP: Logged
Message: The first thing I always do with trans probs is
change the fluid and filter and go from there
Chrysler ATF +4
Amsoils universal synthetic will make it quiter
and shift smother.
In your manual they will recomend +3 but now
chrysler recomends the full synthetic +4 for
all the truck trans
Are you sure its not a wheel bearing whining
It also sounds like your engine temp sensor took
a crap, not the guage sending unit but the temp
sensor
There is also a trans temp sensor that can cause
O/D shift probs, located in left cooling line
near the radiator.
You need a digital volt meter and you can check
these sensors.
Here are the tables from one of my previous posts
http://www.dodgedakota.net/boards/v6/6150.html
Larry J&J Auto
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|