From | Message |
DeathDak Dodge Dakota JOIN HERE
1/14/2009 19:42:15
|
Subject: Larry,daddio,dak49... swap help! IP: Logged
Message: goin from 3.9 to a v8. is there a big difference in exhaust tone between 4.7 or 5.9? is it worth getting a 5.9 over a 4.7? would i have to step the rear up to 9.25, or would the 8.25 be ok? also, i hve a 3.92 rear, is the gearing too steep for the bigger engine? and is there a good place anyone knows of to find a good used engine that wont detonate the second it starts?
|
intensedak39 *GenIII*
1/15/2009 18:00:54
| RE: Larry,daddio,dak49... swap help! IP: Logged
Message: 5.9 swap would be easier as everything from the engine
accessories to the motor mounts will be the same for the 3.9.
extensive work for a 4.7... especially electronics
|
Dakota49 Gen I
1/15/2009 22:04:09
| RE: Larry,daddio,dak49... swap help! IP: Logged
Message: I agree with intensedak39, the 5.9 would be easier, plus the 3.92 gears should be ok, just add some taller tires and go, if you plan on beating the snot out of it, I would go for a bigger axle (9.25)
As for the exhust note, I'm not sure, it could be more in the muffler than the engine. If using a fuel injected engine, you will still need a new computer, or rather one for a 5.9 (assuming that's what you use)
Good Luck
Dakota49
dakota49
|
J and J Auto GenII
1/16/2009 00:26:34
| RE: Larry,daddio,dak49... swap help! IP: Logged
Message: I also agree a 318 360 swap they will run circles
around the new 3.7 4.7
And the wireing is the same
nd they are real mopar motors not foreign
Larry J&J Auto
|
STS Dodge Dakota JOIN HERE
1/22/2009 14:14:19
| RE: Larry,daddio,dak49... swap help! IP: Logged
Message: You have to agree that the smallest V8 Chrysler currently makes does produce a great exhaust note.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|