| From | Message |
Olindo
Dodge Dakota
JOIN HERE
5/02/2006
19:53:23
|
 Subject: Brake Calipers
IP: Logged
Message:
Can anyone tell me what size hex key is needed to remove the caliper mounting pins on a 99 dak?
Thanks,
Olindo
99 Dak 4x4
homebrew CAI
TPS mod
IAT relocated/switchable
Dynomax Superturbo
|
cuzindoug
GenIII
5/02/2006
20:00:43
|  RE: Brake Calipers
IP: Logged
Message:
3/8 or a 10mm.
If it doesn't fit, you're using the wrong hammer!
|
Olindo
Dodge Dakota
JOIN HERE
5/02/2006
20:05:44
|  RE: Brake Calipers
IP: Logged
Message:
thanks CuzinDoug...
|
Olindo
Dodge Dakota
JOIN HERE
5/04/2006
12:54:25
| RE: Brake Calipers
IP: Logged
Message:
Actually....it takes a 7mm hex key to undo the caliper pins....10mm is way too large (no matter what kind of hammer you use). I found this out the hardway..figured I'd pass the info along.
|
Obio3
Dodge Dakota
JOIN HERE
5/04/2006
15:47:24
| RE: Brake Calipers
IP: Logged
Message:
I have a 99 4x4 and second 7MM
So many problems .... So little time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
