Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
18:17:06 - 11/14/2024

V6 Dakotas
FromMessage
maceacernb
Dodge Dakota
JOIN HERE
 Email

1/26/2005
06:47:30

Subject: HELP! Please!
IP: Logged

Message:
Ok Please help if u can this problem is getting really anoying!!
I have a 97 Dak 3.9, and it runs fine when warm, but when the cold weather hits, it starts fine and runs 4 about 5 min of driving then it starts to die, and I have to keep the revs us arround 2000 to keep it running, then 5 more min down the road it is fine. I changed the coolant temp sensor and still the same. Someone in an old post sugested the AIT sensor, i think i might try that next.
any help would be awesome.
Thanks,
Brian





actually
Dodge Dakota
JOIN HERE


1/27/2005
19:44:27

RE: HELP! Please!
IP: Logged

Message:
IAT not AIT it means intake air temp



maceacernb
Dodge Dakota
JOIN HERE
 Email

1/28/2005
16:11:15

RE: HELP! Please!
IP: Logged

Message:
Yeah sorry i know, it was a typo
Nobody has any ideas??



crashman1000
Dodge Dakota
JOIN HERE
 Email

1/28/2005
23:49:34

RE: HELP! Please!
IP: Logged

Message:
Sounds like an IAC problem. (Idle Air Control) Which is a little motor in your throttle body that controls the Air flow to the motor at idle. I talked with a Dodge tech about a similar problem I was having with my truck. Also, the Dakota throttle bodies are known for getting dirty and acting up, try getting some throttle body cleaner and an old SOFT toothbrush and cleaning the throttle body. If nothing else a clean throttle body means better performance than a dirty one. Good Luck.



maceacernb
Dodge Dakota
JOIN HERE
 Email

1/29/2005
00:05:51

RE: HELP! Please!
IP: Logged

Message:
Ok I tested the IAT sensor as per my haynes manual and it was all good. I have cleaned the throttle body. Then i did a little playing with vac lines and my evap system and discovered that when the truck is spittin and pukein if i disconect the hose rinning between the throttle body and the evap control solenoid it runs nice, but plig that line with my thumb and she starts coughin. So I have replaced the solenoid with one from a wrecker, and just have to wait till mornin to see the results.


does anybody know what that evap solenoid actually does??
Cheers
Brian



maceacernb
Dodge Dakota
JOIN HERE
 Email

2/03/2005
22:49:01

RE: HELP! Please!
IP: Logged

Message:
So i replaced the solenoid and still same crap!! I also tried cleanin the tb and iac, they r now like spotless.
I am really getting pissed at this, it seems nothing will work!! and nobody know anything, yet other people have the same problem!!
PLEASE HELP!!



spt
Dodge Dakota
JOIN HERE


2/03/2005
23:14:14

RE: HELP! Please!
IP: Logged

Message:
Try this, pull the MAP sensor out and put it in the house over night by a heater vent, then stick it back in you truck. The truck may run a little funny at first but the computer will adjust in about 10 minutes. When moisture gets in the MAP sensor it will casue your engine to do funny things when it cold outside. Are you getting any codes?



spt
Dodge Dakota
JOIN HERE


2/03/2005
23:20:04

RE: HELP! Please!
IP: Logged

Message:
This is a very good site for trying to fiqure out problems.

http://minimopar.knizefamily.net/



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.