Forums
Forum Tools
|
 |
18:00:58 - 11/14/2024
Custom Style
| From | Message |
conig
Dodge Dakota
JOIN HERE
6/16/2004
12:27:10
|
 Subject: painting 4.7L intake manifold.
IP: Logged
Message:
subject sums it up. If I were to paint the 4.7L intake manifold. would I have to use engine paint?
or being that it is plastic would I be able to use a basic enamel since the heat shouldn't be as bad as a metal intake.
|
IntenseDak39
*GenIII*
6/16/2004
12:55:46
| RE: painting 4.7L intake manifold.
IP: Logged
Message:
i have used basic enamel on aluminum intakes... so i dont see why it wouldnt work on plastic.
i have even used regular paint on valve covers without any problems.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
.boB
Dodge Dakota
JOIN HERE
6/16/2004
16:37:54
| RE: painting 4.7L intake manifold.
IP: Logged
Message:
Use any good paint specifically designed for plastic, like that new Krylon stuff. Like anything else, surface prep is the key.
When the EGR passages traveled through the intake manifold, hi-temp paint was required. But after running the engine for a while, feel your manifold, it will be pretty cool. There's not enough heat there to matter.
|
conig
Dodge Dakota
JOIN HERE
6/16/2004
16:39:53
| RE: painting 4.7L intake manifold.
IP: Logged
Message:
I didn't think that the 4.7L motor had an egr valves in 2000?
thankf for the repsonses as well.
|
IntenseDak39
*GenIII*
6/16/2004
22:09:28
| RE: painting 4.7L intake manifold.
IP: Logged
Message:
he is saying that "when" they had them. Some of my parts on my big block are painted with regular Dupli-Color Intense Pearl Blue but they get pretty hot;
* aluminum valve covers
* alternator bracket
* iron water pump/housing
the housing i first painted with flat black engine paint to try to help out with the intense... and so are everything is okay with them. The valve covers were powdercoated black from the factory and i painted them with the intense blue.. sanded, then shot with a LOT of clear coat. One i used high temp clear coat while the other i forgot and grabbed the wrong can. The clear has burned off of it where it sits really really close to the passenger's side exhaust manifold... but the intense is still okay.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
