From | Message |
golona Dodge Dakota JOIN HERE
11/30/2005 22:27:30
|
Subject: help 33" with 3"bl IP: Logged
Message: hi
I have 99 reg cab 2wd 3.9 sport
can iI fit 33" on stock rims??
if so
are they going to fit with 3" bl
help
|
Justin Dodge Dakota JOIN HERE
11/30/2005 22:54:44
| RE: help 33 IP: Logged
Message: Nope.
|
CrackDak98 Dodge Dakota JOIN HERE
12/06/2005 22:56:11
| RE: help 33 IP: Logged
Message: What size tires are you running now? i have a 98 2wd regular cab and i am running 31's stock height..so i believe that it can be done with minor trimming
|
golona Dodge Dakota JOIN HERE
12/07/2005 00:16:48
| RE: help 33 IP: Logged
Message: stock 235x70x15
|
Justin Dodge Dakota JOIN HERE
12/07/2005 22:05:59
| RE: help 33 IP: Logged
Message: If you max out your t-bars and put a body lift on and do some good trimming on the front valance it is possible
Still i am not sure how it would work, There is a guy on here (GRONK) who has 3 inch bl and 3 inch fabtech suspension and sports 33s and they look like the feel the wheel well nicely.
I would say it is virtually not possible but good luck
|
Justin Dodge Dakota JOIN HERE
12/08/2005 13:33:43
| RE: help 33 IP: Logged
Message: Golona~~ i was mistaken, Gronk DOEs NOT have a 3inch suspension he has 1.5" coil spacers up front and 3" bodylift, so it can be done, forgive me. however i believe the stock wheel have such deep backspacing the 12.5 width will cause some frame rub.
|
golona Dodge Dakota JOIN HERE
12/08/2005 23:54:02
| RE: help 33 IP: Logged
Message: thx Justin
I'm new for dakota subject
I'm new for do it yourself too
but I'll try
do u know any web site that can help
??????????????
|
Fred Dodge Dakota JOIN HERE
12/10/2005 02:12:18
| RE: help 33 IP: Logged
Message: you cant max out tbars that done exist on 2wd
|
Justin Dodge Dakota JOIN HERE
12/10/2005 10:35:21
| RE: help 33 IP: Logged
Message: whoops! i forgot this is 2wd you have no torsion bars...there goes that, but the coil spacers will act as an equivlent.
This one. if you can do a search (i think you have to be a member now??) there is tons on information on body lifting, and probably some on coil spacers too.
i don't know of any place to get much help becuase 2wd lifting is a little rare. i would start a new theard asking for advice on the subject. maybe people like gronk will reply and help you out...? good luck
|
golona Dodge Dakota JOIN HERE
12/14/2005 19:15:30
| RE: help 33 IP: Logged
Message: do u guys have any pics of 2wd with 33"?
and how u did it??
|
Justin Dodge Dakota JOIN HERE
12/14/2005 20:23:37
| RE: help 33 IP: Logged
Message: http://dodgetruckworld.tenmagazines.com/mygallery.ten?id=7659
There's Gronk's Rig
|
golona Dodge Dakota JOIN HERE
12/14/2005 20:39:17
| RE: help 33 IP: Logged
Message: thx Justin
|
T.J. Dodge Dakota JOIN HERE
1/03/2006 18:26:31
| RE: help 33 IP: Logged
Message: hey bud 2wd drive 2001 dakota here 1.5" coil spacers and 2 inch body on my truck reg cab too.... fits 33x12.5 on stock rims only rubs on stabilizer bar when turning....didnt trim a thing IT CAN BE DONE regardless of what anyone says
|
golona Dodge Dakota JOIN HERE
1/04/2006 00:10:49
| RE: help 33 IP: Logged
Message: Thx T.J.
can u mail me some pics of your truck???
golonaus@yahoo.com
|
Cowboy Dodge Dakota JOIN HERE
1/10/2006 12:50:43
| RE: help 33 IP: Logged
Message: could i see also and where can u find coil spacers for a 00 dodge dakota ive looked everywhere i can only find them for rams i was almost forced to buy new front coils cause i couldnt find them
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|