| From | Message |
amerrycan
Dodge Dakota
JOIN HERE
12/07/2003
15:25:05
|
 Subject: speed limter??
IP: Logged
Message:
I have been trying for quite awhile to find someone that can change or take out the speed limter or just reprogram my ecm. I have been told from a few ppl that they wont do it because the truck is a 4x4. I have a 99 5.2L 5 speed standard cab. The truck is mainly used for a chase truck for our off road race team. One of my techs said to try getting online and find a fourm site on dakotas. so here I am. The truck has had some minor mods suck as a air intake system, cat back, termostat, jet stage 3 nonemision chip. can some one plz help me Thx James
|
help
Dodge Dakota
JOIN HERE
12/07/2003
16:15:20
| RE: speed limter??
IP: Logged
Message:
get rid of the jet and get a superchip programer
|
amerrycan
Dodge Dakota
JOIN HERE
12/07/2003
16:36:47
| RE: speed limter??
IP: Logged
Message:
from what i have been told and seen the any chip will not take out the speedlimter or raise it. the cut off it like 119mph standard with all chips to the best of my knowldge.
|
gen1dak
Dodge Dakota
JOIN HERE
12/07/2003
20:05:49
| RE: speed limter??
IP: Logged
Message:
Don't the Mopar Performance PCM's do this, or was that just on the earlier (OBD1) Magnums?
|
DSW
Dodge Dakota
JOIN HERE
12/10/2003
18:23:24
| RE: speed limter??
IP: Logged
Message:
I have a 00 CC 4.7 Dak, speed limiter is set at 98 MPH. From what I understand the limiter is set at 98 MPH because the stock 1 piece aluminum driveshaft will exceed it's critical speed past 98 MPH, don't want the drive shaft flying apart at 100+. The Dak's with the 2 piece driveshaft have the 119 MPH limiter.
If I am wrong on this,let me know as I wondered why some Dak's are cut off at 98 and others 119.
|
U R WRONG
Dodge Dakota
JOIN HERE
12/10/2003
18:44:11
| RE: speed limter??
IP: Logged
Message:
the speed limiter is determind by the speed rating of tires
|
Scott
Dodge Dakota
JOIN HERE
12/10/2003
20:31:26
| RE: speed limter??
IP: Logged
Message:
The mopar pcm *Performance brain* on my 96 Dak took off the limiter.
|
amerrycan
Dodge Dakota
JOIN HERE
12/10/2003
20:39:23
| RE: speed limter??
IP: Logged
Message:
96 is the old body dak gen1 and is a differnt ball game then the ge2 or3 dak. as for the drive shafts i dont know but ford lightings run alu driveshafts and there is no problem losing the limter on those
|
abnscout82
Dodge Dakota
JOIN HERE
12/10/2003
20:54:01
| RE: speed limter??
IP: Logged
Message:
I would check with superchips, with the reprogrammer you can adjust how you want the engine to perform and i think also make adjustments for your aftermarket mods.
|
DSW
Dodge Dakota
JOIN HERE
12/10/2003
20:56:33
| RE: speed limter??
IP: Logged
Message:
So who has the 119 MPH limiter besides the RT's? Or should I say, does anyone with the 119 MPH limiter have an aluminum 1 piece driveshaft and what speed rating are your tires?
Tires that came on my truck (Michelin LT something or anothers) are not recommended for speeds above 85MPH, but the limiter is set at 98 MPH???
|
slow2dak
Dodge Dakota
JOIN HERE
12/10/2003
22:11:48
|  RE: speed limter??
IP: Logged
Message:
my dak has the 119mph speed limiter but, i dont have an aluminum driveshaft. mine is cast iron.
Mike
02 4.7/45RFE RC Sport
3.55 and a one legged wonder
2 1/4" True Duals, Flowmaster Mufflers, no tailpipes or dumps
tps .701
relocated IAT
Adjustable ECT sensor
K & N drop in
Removed rubber flap
Adjustable LPS
Unplugged ABS Sensor (no speed limiter)
All on street tires
Best 1/4: 15.20 @ 89.52 with single 3" flowmaster
No runs yet with new exhaust setup
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
