Forums
Forum Tools
|
 |
18:05:54 - 11/14/2024
Dakota Performance
| From | Message |
conig
Dodge Dakota
JOIN HERE
11/19/2002
13:10:43
|
 Subject: how to build homemade catbox-howto.
IP: Logged
Message:
I've gotten alot of emails lately and have seen some posts about makeing a mil eliminator for either removing the catalitic convertor or gutting the precats. first off I'd like to say I do not aprove of removeing a catalitic convertor on a street driven vehicles, and I am in no way responsible for the actions you take to your vehicle or any reprebution you receive if you drive a street driven vehicle with no catalitic converters.
building a mil eliminator for a dakota is very simple you need a 650k resistor and a 1mfg capacitor both of these can be found at your local radio shack for like $4.00.
the link below is were I found this information with alot of trial and error I had a set like the ones in this link on my 98 svt contour so I could run gutted precats. and I had them on that car for about six months with no problems.
http://www.zx2racing.com/mods/mods_mil.htm
I have one of these on my single cat 4.7l and have had it on my truck for almost a year now with no problems. I know of one other person that uses one on a v6 I beleive 99 and hae has had no problems.
also previously it was stated that I should build these and sell them for $7.00 includes shipping if anyone wants me to go this route let me know and if people want me to do it(since I have built about 30 of these) let me know at my email.
MConiglio@fbmc-benefits.com
anyother questions just keep this thread going.
matt.
2000 cc 4.7l auto
performance- kenne-bell pcm, dynomax superturbo muffler, relocated iat, custom TRUECOLD AIR intake,180degree thermostat. powertrax locker, springclamps, ported tb.
asthetics-apc diamond clear corners, carbonfiber alteezas(removed) fenderflares, speedgrill, piaa foglights,pro-comp lightbar, pro-comp spot lights, extang tonnoe, single racing stripe, 17 eagle alloy timeless six clones 265-70-17 cooper mt. 2inch coil spacers, roughcountry add a leaves(soon to be installed). indiglo gauges, flamed floor mats.
stereo- astrovision5.6inch tv, playstation2, kenwood mp3 serius headunit(once the nicestone), alpine 1507 subamp 1500x1, 2 extant x series 12's,alpine 4channel amp, boston acoustics mids and highs,
|
Texas Todd
Dodge Dakota
JOIN HERE
11/19/2002
16:11:23
| RE: how to build homemade catbox-howto.
IP: Logged
Message:
conig, conig?, anyway,
ON my o1 4.7, that's 7.00 to bypass both gutted precats?
Either way sounds like a good deal.
|
conig
Dodge Dakota
JOIN HERE
11/19/2002
16:21:25
| RE: how to build homemade catbox-howto.
IP: Logged
Message:
7.00 each. there real simple to build, I cover mine in epoxy when I'm done.
|
Texas Todd
Dodge Dakota
JOIN HERE
11/20/2002
08:46:10
| RE: how to build homemade catbox-howto.
IP: Logged
Message:
Thanks conig,
stay on the boards, I'm not doing any outflow work right now, but maybe in the future.
Todd Bouton
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
