| From | Message |
smoody
Unregistered
3/05/2001
11:39:23
|
 Subject: Stock R/T exhaust Q?
IP: Logged
Message:
Has anyone heard a stock R/T exhaust? I've heard
some Flowmaster and others and they are not for
me, too loud. I'm considering the Dynomax super
turbo or the ultra flow with the R/T 3" pipe. Does
the R/T use a ultraflow or super turbo? Thanx.
|
Anthony
GenIII
3/05/2001
13:01:07
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
The R/T in 98,99 used a dynomax ultra-flo to Dodges specs, not the same as a standard ultra-flo.
The R/T in 00,01 uses a Dodge muffler.
For some sounds & videos of R/T's go to
http://blackdakrt.com/mpegs.html
Anthony
2000 Dakota Sport Plus CC 4X4 4.7, 5spd, 3.55, Intense Blue, Loaded
|
smoody
Unregistered
3/05/2001
16:05:01
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I listened to the the stock R/T and all I heard
was the stereo.
|
smoody
Unregistered
3/05/2001
16:05:45
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I listened to the the stock R/T and all I heard
was the stereo.
|
Bob
DakotaEnthusiast
3/05/2001
16:17:16
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Smoody I have the 2000 R/T muffler and tail pipe on my 2000 4.7 and I love it,it sounds great,better than on the R/T. HeHeHe It is cheaper than other systems on the market and it is stainless.It does not annoy the hell out of me on the e-way.It is a straight through muffler,made by Chrysler.
Zoom Zoom
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
Blizzard
GenIII
3/05/2001
17:43:05
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Bob, did you buy your setup new from Dodge? or where did you get it? What kind of price difference compared to Dynomax, Flowmaster, etc, are we talking about? Cuz I like the sound of the R/T's too!
2001 Black Quad Cab 4x4, 5.9L, 3.92 ratio, loaded for bear
|
Bob
DakotaEnthusiast
3/05/2001
18:32:19
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I ordered it new,it cost me 287.00,I work for Chrysler,so I got a discount.If you know anyone that works there,that would be cool for you.Other good points to the R/T exhaust is that it makes for a nice fit,and my dealer can't cry about it,if I have problems with the engine. Muffler #52103323 tail pipe #52103262 one rear hanger #52103064 Remember it will last longer than a after market.
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
Anthony
GenIII
3/05/2001
21:22:54
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Bob do you know if the pipe setup on the 99 5.2 from the headers down to the cat are the same as the 4.7 setup?? You have a 4.7 with an R/T exhaust on it, which is design for the 5.9. And that fit perfect with no problems with the pipes.
The reason why I'm asking is that I called my dealership to find out about the Mopar 3" cat-back they offer. But it's only for 99 and lower models with the 5.2, that's why I need to know if the setup of the pipes are the same on the 4.7.
I asked them at the dealership about the difference from the 5.2 & 4.7 pipe setup. They don't know if it's the same, neither does my uncle know.
I can get this cat-back at dealer cost from my uncle who's the manager of a dealership. Can you help me out???
Thanks
Anthony
2000 Dakota Sport Plus CC 4X4 4.7, 5spd, 3.55, Intense Blue, Loaded
|
Bob
DakotaEnthusiast
3/06/2001
04:17:53
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Anthony--HotRod did a test with a Mopar exhaust kit and it was on a R/T.I know that the 3.9 4.7 5.9 use the same set up,I would think that the 5.2 would be the same set up.I know that the 2000 Mopar catalog list the exhaust kit for 2000 4.7 Dakotas.Go to the library and look at HotRod [November 1999]mag. Hope I helped in some way.
Zoom Zoom
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
Anthony
GenIII
3/06/2001
08:17:24
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
The dealer had the 2001 catalog, the newest kit is for the 99 5.2 no 2000 yet. The same goes for Mopar's website. The dealer said the kit could be out by maybe June. Bob would you be able to find out the part number for my truck? If you don't mind, so that I can throw it back in the dealers face.
Thanks Bob you've been a BIG help, I'll see if I can find that HOTROD issue.
Anthony
2000 Dakota Sport Plus CC 4X4 4.7, 5spd, 3.55, Intense Blue, Loaded
|
Black98Dak
DakotaEnthusiast
3/06/2001
12:44:48
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
What's the point of doing an exhaust system if it isn't loud? heheh
guess growing up in a small town in the south, you get used to the loud ass trucks with glass packs on them... oh, wait, our ram has packs and no cats.... guess you can have them in big towns too! =]
Black 98 5.2l RC with lots of toys
http://members.home.net/ggaskin
|
Bob
DakotaEnthusiast
3/06/2001
14:37:30
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Anthony--My 2000 catalog page 37, says to us part #p4876902wa 1989-00 5.9-all...list for 325.00
Bob
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
BigA
Unregistered
3/07/2001
13:01:20
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Hey Bob, just to clarify, is the stock
R/T exhaust single or duals? Thanks.
|
Bob
DakotaEnthusiast
3/07/2001
15:04:10
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
BigA--single--but from what I here the R/T has 2 exhaust pipes going into the one cat,I wonder if the 4.7 is the same way.
Zoom Zoom
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
Bernd
GenIII
3/07/2001
21:38:20
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Dual inlet Cat with a single outlet. Most of the R/T people have swapped out the stock system for a 3" cat-back. (Seems to work much better on them.)
Bernd D. Ratsch
1997 Dodge Dakota SLT
Supercharged w/Nitrous
|
Anthony
GenIII
3/13/2001
21:05:36
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Hey Bob get this, I went to the dealership to order the Mopar 3" cat-back exhaust, the one you told me in the above post. When I talked to the guy about the 5.9 mopar cat-back fits the 4.7 pipe, he said that it will need to be modify to fit my truck (but he wasn't for sure). I told him that an R/T bolts to the 4.7. (I used you as an example) he said it could be possible. He told me that he has to call some one else from Chrysler to get approval that the 5.9 cat-back will fit my truck. I have to call him back tommorrow to hear what he said.
I want to make sure that the cat-back for the 5.9 will fit my truck? Is there any modification that is needed to be done? Your system bolted right up to the factory hangers, right?? If yours system fits like a glove mine should fit too.
Bob, I ask for your help again.
Thanks in advance
Anthony
2000 Dakota Sport Plus CC 4X4 4.7, 5spd, 3.55, Intense Blue, Loaded
|
smoody
Unregistered
3/14/2001
10:48:12
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
My '01 4.7 has 1 cat in each bank, then combines
and goes into 1 larger cat.
|
Bob
DakotaEnthusiast
3/14/2001
21:45:31
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Anthony..the R/T exhaust bolted wright on my truck,pease of cake.All you need is the rear tail pipe hanger,R/T uses a extra one,there is a hole in the frame for it.Be for I made my decision to buy it I went to the dealer on a Sunday and got under a R/T and checked it out.If you buy the Mopar parts one,it will have all thr hangers.Let us know what you come up with.
c ya
00 Dak.CC SLT Plus 4.7L 235hp 355 L-Slip Auto.
|
RYANR/T
Unregistered
4/01/2001
15:58:35
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I have a 99 DA CC R/T. The stock exhaust is throaty, but i'm samvin my pennies for a dual setup.
|
CanDak
Gen III
4/01/2001
16:28:57
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
March issue of Mopar Muscle magazine did a dyno test with a K&N single catback system on a R/T. Results were 1.6 HP loss and a gain of 4.0 ft-lbs of torque.
99 CC Sport 4x4,5.2 Auto 3.55
|
Jason
Dodge Dakota
8/26/2001
10:49:55
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Hey Bob,
You don't happen to know the diameter of the pipes you put on your truck, do you? Are they 3" or 2.5"?
|
Hot RT
Dodge Dakota
8/26/2001
13:50:29
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Guys, just to clear the waters. 00 RT has a single in, single out cat, 2 1/2". 2 1/2" Ultra Flow muffler and a 3" mandrel bent tailpipe from the factory. The Mopar Performance exhaust is a 3" cat back using a 3" Ultra Flow and mandrel bent pipes. A Walker Dynomax rep gave me this info. I know the 98/99 RT had a dual, single out cat, but for some reason they changed it in 00. I don't know what the 01 has.
|
Anthony
Dodge Dakota
8/26/2001
18:16:07
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I got the Mopar 3" Cat-Back installed back in April.
What a system, I recommend it very highly. For more info see my site or email me.
Anthony
www.geocities.com/intense79/index.html
|
Jason
Dodge Dakota
9/26/2001
19:31:41
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Does anyone know what a good product to clean rust off the R/T Tailpipe? Also does any one know how much the R/T tailpipe cost from the dealership?
|
Bob
GenI
9/26/2001
19:51:49
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Use Dupont rust remover,work's ok.But you are never going to keep the rust of it{rain,mud,road crap,salt etc.]It looks good ,but the tip is not stainless.I think I payed about 130, my Chrysler discount.
|
rEID tARDO
Dodge Dakota
9/27/2001
10:00:00
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
I have the Mopar 3 in. cat back sys. also. I love it. Loud enough to know you got a v8 but no resonance in the cab.
|
Fred
Dodge Dakota
JOIN HERE
3/10/2002
04:26:30
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
will a 98 stock R/T exhuast fit a 2000 V6 CC sport?
|
scat pack
GenIII
3/10/2002
11:18:37
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
Light rust removal - try product with French name "Outar" I think, lost packaging, it's pronounced "water". Custom Harley shop turned me on to it, works great and leaves a light protective coating.
2K RC 4.7 4x4
|
AaronM
Dodge Dakota
JOIN HERE
6/03/2002
16:42:34
| RE: Stock R/T exhaust Q?
IP: Logged
Message:
wondering if anyone has taken the cat out and what they did with the sensor behind it like on my 99 r/t
|
| | P 1 Next Page>> |
