From | Message |
happymoparman Dodge Dakota JOIN HERE
12/06/2009 17:37:44
|
Subject: 4x4 indicator light on dash wont work IP: Logged
Message: can anyone help me out on this is there a fuse or a switch i can replace
|
other bill Dodge Dakota JOIN HERE
12/07/2009 10:02:13
| RE: 4x4 indicator light on dash wont work IP: Logged
Message: If everything else works...it's just that the indicator does not illuminate, then I would suspect:
- The bulb (if there actually is one) depending on the year. The newer, the less likely.
- A dirty wire connection
- a loose wire connection
|
happymoparman Dodge Dakota JOIN HERE
12/07/2009 12:38:52
| RE: 4x4 indicator light on dash wont work IP: Logged
Message: where do i look for a dirty wire or loose connection i checked the bulb and it is good and by the way everything else does work
|
robby Dodge Dakota JOIN HERE
12/07/2009 17:11:01
| RE: 4x4 indicator light on dash wont work IP: Logged
Message: ck the switch on the t-case. if you unplug the switch jump the connector going to the truck if it lights up its the switch is bad. if not you have a broken wire somewhere. let me know if you get it figured
|
happymoparman Dodge Dakota JOIN HERE
12/09/2009 14:12:35
| RE: 4x4 indicator light on dash wont work IP: Logged
Message: I have 2 plugs on the transfer case. What are they for and which one do i jump the connector on.
|
robby Dodge Dakota JOIN HERE
12/10/2009 10:21:33
| RE: 4x4 indicator light on dash wont work IP: Logged
Message: the connector thats by the sifter linkage. the one by the tail shaft is your speedo
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|