Forums
Forum Tools
|
 |
18:03:19 - 11/14/2024
Lowered / Slammed Dakotas
| From | Message |
Joe
Dodge Dakota
JOIN HERE
6/13/2005
14:01:17
|
 Subject: Lowering my Dak
IP: Logged
Message:
I own a 2004 Dakota Sport. I want to drop it, but not too dramatically. Does anyone have any suggestions or thought? I don't want to destroy underneath of my truck, just add a lower look. thanks in advance.
|
NJQCDak
GenIII
6/13/2005
20:28:53
|  RE: Lowering my Dak
IP: Logged
Message:
Check my thread http://www.dodgedakota.net/boards/low/2454.html
Several ways of dropping:
1. Hotchkis 2/3 drop, front coil springs/rear leaf springs (TVS-coils, leafs, shocks, sway bars)
2. DJM 2/3 drop, drop control arms/lowering blocks
3. Western Chassis 2/3, drop control arms/shackles & hangers
4. Belltech, front coil springs/shackles & hangers
5. Ground Force (sorry, don't know much about this one)
I hear Hotchkis is prefered. It's a handling package and not just a drop. I myself, am leaning towards Hotchkis. Do a search for info. I hope to save up money to buy the hotchkis coils and leafs and also do ball joints. I need to save to pay for someone to install. I hope this helps.
'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake, SS Gibson exhaust, MSD Wires, Accel 300 ignition, NAPA Cap, F&B Billet 48mm TB , JBA Ti Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks, Stillen front bumper, Crower 1.7 rockers, Superchips Microtuner
|
P Y E
Dodge Dakota
JOIN HERE
6/13/2005
22:27:40
| RE: Lowering my Dak
IP: Logged
Message:
The Hotchkis TVS would be anyones first want, but it is very pricey for a small drop.
Best bet would be 2" DJM lowering arms and some 3", maybe 4" shackles/hangers.
Try to shy away from coils(unless they are hotchkis) and blocks.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
