|
|
|
|
||
|
||
| From | Message |
| MJ Unregistered  1/10/2001 15:26:30 |
 Subject: SHORT SHIFTERIP: Logged Message: HAS ANY BODY HEARD ABOUT THE NEW SHORT SHIFTER BY HURST AT MR GASKET FOR 94-2000 DODGE DAKOTAS WITH 5 SPEED 3500 SERIES TRANSMISSION OR HAVE ONE. ALSO WHAT IS THE TRANSMISSION IN THE 99 V-6 5 SPEED ----SERIES |
| Bernd GenIII  1/10/2001 16:35:11 | RE: SHORT SHIFTER IP: Logged Message: Heard something about it but haven't physically seen it yet. Ya got a link? Bernd D. Ratsch 1997 Dodge Dakota SLT Supercharged w/Nitrous |
| intense99dak Gen III 1/10/2001 18:21:10 | RE: SHORT SHIFTER IP: Logged Message: The manual transmission in the v6 Dakota's is the AX-15. Hurst does make a shifter for the AX-15 only. Part number is 391-5050 from Jegs.com and is $191.98 shipped to your door. Mine just arrived today, but I don't have any pictures of it yet. If you look at http://www.mrgasket.com/ftp/pdf/HN2000.pdf On page 19 you can see a picture of it and some specs. The shifter is more angled that what it shows in the picture with a (about) 40 degree angle once it somes out of the boot. It does clear the center section of the seats no problem. The shifter is also angled towards the driver by about 8 - 10 degrees. The throw is measured at 7 1/2" - 8". The instructions are excellent and I hope to have it installed this coming Sunday. I'll have some photos and instructions up on my page shortly thereafter. Chuck Robbins '99 Dakota Sport www.intense99dak.com |
| Bernd GenIII 1/10/2001 23:42:08 | RE: SHORT SHIFTER IP: Logged Message: Ahhhh....@#$!!! Little note on the page: * Will Not Fit Vehicles with Body Lift Kit @#$!!! Hehehe...guess I need to order one and find out why not...NEW MOD! Thanks Chuck! :) Bernd D. Ratsch 1997 Dodge Dakota SLT Supercharged w/Nitrous |
| intense99dak Gen III 1/11/2001 00:01:01 | RE: SHORT SHIFTER IP: Logged Message: Bernd, The only reason why this shifter won't fit a lifted Dakota (as it sits on my desk in front of me) is because the billet shifter arm isn't long enough before it bends. The shifter arm is held on by two screws and can be replaced with another shifter arm (I wish I still had my digital camera so I could send you a pic). It might be worth an email to Hurst or B&M to see if they have something compatible. Chuck Robbins '99 Dakota Sport www.intense99dak.com |
| Bernd GenIII 1/11/2001 00:38:58 | RE: SHORT SHIFTER IP: Logged Message: Any place on the bottom to extend it a bit? Bernd D. Ratsch 1997 Dodge Dakota SLT Supercharged w/Nitrous |
| intense99dak Gen III 1/11/2001 01:10:40 | RE: SHORT SHIFTER IP: Logged Message: Yes, there is. You could take a piece of metal which is the needed length and drill two sets of holes in it. One set for the handle and one set for the shifter mechanism. Then bolt everything together. I'm going to throw the shifter on my scanner tomorrow evening and try to get a few pics of the connection. I'll let you know how I make out. Chuck Robbins '99 Dakota Sport www.intense99dak.com |
| Bernd GenIII 1/11/2001 12:50:53 | RE: SHORT SHIFTER IP: Logged Message: Cool deal...i'll wait for the pics before I chop up the Dak again. ;) Bernd D. Ratsch 1997 Dodge Dakota SLT Supercharged w/Nitrous |
| mj Unregistered 1/11/2001 15:32:03 | RE: SHORT SHIFTER IP: Logged Message: let me know when you get the picture and dir up on your site thanks. |
| P 1 | |
Post a reply to this message: Username Registration: Optional All visitors are allowed to post messages |
|
Home | Photos | Message Board | Links | Classified | Mailing List | Contests | Feedback |
 |
Property of Virtual-Masters, Inc. |
 |