Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
17:46:57 - 11/14/2024

General Dakota Board
FromMessage
Joe.C
Dodge Dakota
JOIN HERE


3/29/2005
16:46:23

Subject: Transmission fluid (ATF+3)
IP: Logged

Message:
Does any one use that?

If so then who does your transmission shift?



choochoo
Dodge Dakota
JOIN HERE


3/29/2005
17:36:05

RE: Transmission fluid (ATF+3)
IP: Logged

Message:
What do you run it in? What year? What engine? Shifting depends on how much throttle you give it too.
I learned over the years that the only trans fluid to use in a Mopar product is Mopar fluid.
Dodge Caravans were notorious for blowing trannys every 30,000 miles, but if you used Mopar ATF 3 only, and changed the fluid/filter at spec mileage the trans would last for 100,000 miles.
I tried aftermarket ATF 3 + Slick 50 trans additive and the trans started slipping. Flushed it and replaced with Mopar 3 - no problem.

My 2004 Dak takes Mopar ATF 4+ so that is what I will use, religously. Don't know what speeds my Dak shifts at because it is so smooth. Ticks over at 1600 rpm @ 60 mph though, if that helps. Real good on gas.

2004 Dak 4.7 auto 5 spd 4x4 QC 3.55 axle
K&N air filter



but
Dodge Dakota
JOIN HERE


3/29/2005
18:42:07

RE: Transmission fluid (ATF+3)
IP: Logged

Message:
except for a certain minivan all previous atf+3 is to be atf+4. amsoil universal atf works well also. dc backed spect the atf+4 to 1999 i believe.



matt
Dodge Dakota
JOIN HERE


3/29/2005
18:49:12

RE: Transmission fluid (ATF+3)
IP: Logged

Message:
Atf +4 will work, don't try any others, as I've had issues with tranny flush & fills at work,(Im a tech) with other fluids... never tried amsoil, but it appears to be a reputible company... although I've never heard of it off of this website! I'd stick with the Mopar fluids.



Joe.C
Dodge Dakota
JOIN HERE


4/02/2005
17:36:11

RE: Transmission fluid (ATF+3)
IP: Logged

Message:
I've got a 94 Dakota (318) mated to a 46RH transmisson. I've started using ATF+3 and notice that the shift points arn't very smooth. I gess I should up to ATF+4.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.