Forums
Forum Tools
|
 |
17:55:38 - 11/14/2024
General Dakota Board
| From | Message |
AmsoilSponsor
DakotaEnthusiast
 
12/12/2004
12:04:37
|
 Subject: Replacement Ball Joints = Amsoil Grease
IP: Logged
Message:
Unlike the OEM Ball-Joints ... replacement Ball joints have grease fittings.
Please consider ...
*** Amsoil Synthetic Greases ***
Synthetic Greases (in general) provide the ultimate protection for hard-driven, high-performance vehicles. Synthetics dramatically reduces friction and wear for improved performance. Excels at both high and low temperature performance, and outperforms conventional greases.
__________________________________________________
AMSOIL's top performing lithium complex thickener system provides excellent water resistance as identified by the ASTM D-1264 water washout test. Therefore, even in wet conditions a lubricant film remains present to protect equipment against wear while the corrosion inhibitors prevent rust.
AMSOIL greases adhere to metal and are shear stable during severe mechanical activity. These features mean the grease does not thin during operation, but rather it maintains its consistency and stays in place to provide good lubrication.
__________________________________________________
Amsoil With and Without Moly (please read)
Amsoil makes their synthetic (lithium complex) grease available with and without moly.
_______________  _______________
Synthetic GH Series Heavy-Duty EP Grease
NLGI #1 (Lithium Complex - Moly Fortified)
Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles and other components operating in high-load, low-speed conditions. Product Codes: GHB
Amsoil's Heavy Duty moly grease is recommended for high load, low speed, low temp applications where you need a solid film EP additive like moly. Moly-fortified, with extreme-pressure (EP) additives --- providing outstanding protection for four wheel drive steering knuckles, spring shackles and other components operating in high-load, low-speed conditions.
The presence of moly provides an extra measure of protection in shock loading situations common in both construction and agricultural use. During heavy shock loading, the lubricant film between metal surfaces can be temporarily ruptured, but moly remains intact to prevent metal to metal contact which could cause equipment damage. Moly also assists in dirty environments or when proper re-greasing intervals are not followed.
Note: Amsoil specifically recommends using their multipurpose grease that does NOT contain moly for high temp/high speed bearing applications.
__________________________________________________
Note: AMSOIL GH Greases are available in grade #1 ... and grade #2
AMSOIL GH Greases in grades #1 and #2 are recommended for use in manual or automatic lubricating systems.
NLGI #1 (GHB) greases have better mobility and are the preferred choice for colder applications, for automatic lubrication systems with long pumping runs, and for gear box applications (where recommended by manufacturer).
NLGI #2 (GHD) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, high water environments, and is the primary choice for wheel bearings.
__________________________________________________
Amsoil greases are composed of synthetic base oils and lithium-complex thickeners that provide the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities --- for all around protection in severe conditions.
Some PERFORMANCE FEATURES
- Added EP protection
- Adhesive and Shear Stable - prevents squeeze out
- High dropping point
- Excellent water-washout resistance
- Oxidation and corrosion inhibited
- Excels at both high and low temperature performance
__________________________________________________
To request a FREE Amsoil Catalog click the following link:
Steven Roark , Amsoil Dealer , Proud Sponsor of www.DodgeDakotas.com
AMSOIL Synthetic Motor Oils, Lubricants, Filtration, and Truck Care Products
|
AmsoilSponsor
DakotaEnthusiast
12/12/2004
12:12:48
|  Dodge Replacement Ball Joints = Amsoil Grease
IP: Logged
Message:
Amsoil Series 2000 Synthetic Racing Grease...
equals ... "Unbeatable high-speed/high temperature performance!"
Ultimate protection for hard-driven, high-performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high and low temperature performance. Outperforms other conventional and synthetic greases. Product Code: GRG
_______________  _______________
Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.
Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most nonsolid-fortified racing greases, synthetic or conventional, do not pass. AMSOIL Series 2000 Racing Grease keeps greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener, known for its extraordinary performance in temperature extremes. AMSOIL Series 2000 Racing Grease offers excellent low-temperature pumpability and high-temperature consistency for dependable all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease’s excellent oxidation resistance and robust package of oxidation inhibitors prevent grease breakdown and component surface damage in the highly oxidizing conditions associated with high temperature operations.
Friction Reduction
AMSOIL Series 2000 Racing Grease maximizes power through-put and fuel efficiency by minimizing friction. The extra power given by Series 2000 improves acceleration and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash out and inhibits rust and other forms of corrosion.
_______________  _______________
You can Request a FREE Amsoil Catalog by clicking below:
THANK YOU, Happy Holidays, and Good Luck with your new Ball-Joints!
Steven Roark , Amsoil Dealer , Proud Sponsor of www.DodgeDakotas.com
AMSOIL Synthetic Motor Oils, Lubricants, Filtration, and Truck Care Products
|
GreaseMonkey
Dodge Dakota
JOIN HERE
12/12/2004
23:31:41
|  RE: Replacement Ball Joints = Amsoil Grease
IP: Logged
Message:
I am going to buy my own grease gun and load it with the
AMSOIL heavy duty grease and make them use it when they
replace my balljoints, instead of that cheap crap they have at the
stealership.
Wadda ya' think ?
|
Ratdog
Dodge Dakota
JOIN HERE
12/12/2004
23:39:26
|  I use the Amsoil Moly Fortified Heavy Duty
IP: Logged
Message:
grease. I have my wheel bearings packed with it, and use it for greasing the suspension pieces, and my u-joints for the drive shaft.
I also use this grease for the drive shaft splines on my motorcycle. Great stuff. Since I have one HEALTHY air compressor... I snagged up a Craftsman air-powered grease gun.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
