Forums
Forum Tools
|
 |
17:47:23 - 11/14/2024
[an error occurred while processing this directive]
Dealer, TSB's and Recalls
| From | Message |
Jon P.
Dodge Dakota
JOIN HERE
10/07/2002
15:25:10
|
 Subject: Moog's
IP: Logged
Message:
Does anyone know if the Moog balljoints for the
99's will fit my 01 4.7 ext. cab? My right upper ball joint is bad and needs to be replaced, I am
still under warranty but would rather replace it with a greasable aftermarket ball joint. Thanks.
I am also thinking about replacing my front and rear shocks, they are really bouncy for a 2WD. I have 27,000 miles.
Jon P.
|
Lemmers
Dodge Dakota
JOIN HERE
10/09/2002
09:08:46
|  RE: Moog's
IP: Logged
Message:
I bought MOOG upper ball joints a while back
for my '02 Quad cab. CarQuest didn't have a
listing for 2002 so I used '98 or '99.
They worked great except I had to drill out the
bolt holes in the new ball joints and use 7/16"
fine tread grade 8 bolts instead of the 5/16"
bolts and lock nuts that came with the Moogs.
I drilled them out because the holes in the
upper A-arm were 7/16". I'm not sure why,
maybe the earier Gen 3 Dakotas had smaller
diameter rivets holding the balljoints to the
A-arms or something.
It's worked great for the past 5,000 miles.
Hope this helps,
Lemmers
'02 Quad 2wd 4.7 5spd 3.55lsd. dropped,
tinted, de-stickered, RT wheels w/Toyos,
Access tonneau
'88 LX 5.0 12.7@107 w/75 horse dry shot,
100,000 miles!
|
Jon P.
Dodge Dakota
JOIN HERE
10/09/2002
11:56:56
|  RE: Moog's
IP: Logged
Message:
Lemmers,
thanks so much! Yes that definetly helps.
If it wasn't for guys like you going out on a limb and trying something on your own, I'd be stuck going to the Dodge Dealership and paying a large bill. I really appreciate your help. This forum is great. After I read your post, I ordered the upper Moog ball joint today and will be replacing it soon. Thanks again, this problem has really been annoying and has gotten worse.
Jon P.
01 4.7 auto ext cab
360 Air Intake
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
