From | Message |
JustGotOne Dodge Dakota JOIN HERE
2/01/2003 00:05:10
|
Subject: Where are the tweets? IP: Logged
Message: For the Infinity system, where are the tweeters installed in a quad cab?
|
BAE984 Dodge Dakota JOIN HERE
2/01/2003 02:00:57
| RE: Where are the tweets? IP: Logged
Message: Uhhh, I hope you're kidding. They're at the top inside corner of the front doors. I would think they're pretty obvious.
BAE
|
JustGotOne Dodge Dakota JOIN HERE
2/01/2003 15:06:27
| RE: Where are the tweets? IP: Logged
Message: I don't have the Infinity system and didn't look at any trucks that had it. So no, I wasn't kidding. Thought it was a valid question.
|
Joe Dodge Dakota JOIN HERE
2/01/2003 20:03:04
| RE: Where are the tweets? IP: Logged
Message: Sounds like a simple enough question to me ! But could be easily misunderstood
|
BAE984 Dodge Dakota JOIN HERE
2/01/2003 20:34:44
| RE: Where are the tweets? IP: Logged
Message: Sorry, I thought you had the Infinity (I wasn't thinking, apparently). If you've got the infinity, you know where they are.
BAE
|
JustGotOne Dodge Dakota JOIN HERE
2/01/2003 20:52:02
| RE: Where are the tweets? IP: Logged
Message: Cool, no problem. So, where at the inside corners? Close to the dash?
|
BAE984 Dodge Dakota JOIN HERE
2/02/2003 12:50:14
| RE: Where are the tweets? IP: Logged
Message: The inside corners (I guess you mean the woofers in the front) are right about where your feet are. Just kinda built into the door panel pocket area. The rear speakers are at the feet of the back seat (for Quad Cab).
BAE
|
JustGotOne Dodge Dakota JOIN HERE
2/02/2003 13:10:12
| RE: Where are the tweets? IP: Logged
Message: Well, I have an aftermarket component set that I want to install. Was just wondering if I found some door panels from a totaled truck, could I replace the stock tweeter with the aftermarket one to sort of keep the stock look.
|
BAE984 Dodge Dakota JOIN HERE
2/02/2003 16:22:41
| RE: Where are the tweets? IP: Logged
Message: That should work ok(assuming the speakers are the same size, of course). Don't know if you'd have to do any work on the mounting areas.
BAE
|
R Dodge Dakota JOIN HERE
2/04/2003 22:54:19
| RE: Where are the tweets? IP: Logged
Message: I have a truck without the infinity system and I mounted my tweets in the same location. When you take the door panel off, you will see the template for the cutout already on the inside of the door panel. I would imagine you could paint the grille of your existing tweets to give it a semi-stock appearance. Just another thought....
|
pondhopr Dodge Dakota JOIN HERE
2/05/2003 08:19:31
| RE: Where are the tweets? IP: Logged
Message: I did the exact same thing. I installed a set of polk components in my dak. Just remove the door panel---look on the back side---and you can see exactly where it goes. Then get a set of hole saws---I used the elcheapo set from the local hardware store normally used for putting in door knobs. Cost me about 7 bucks for a complete set. Then just be careful when cutting the hole!
|
JustGotOne Dodge Dakota JOIN HERE
2/05/2003 19:52:22
| RE: Where are the tweets? IP: Logged
Message: How does the staging/imaging sound?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|